 | U-Pol Raptor Truckbed Liner Black 4l Kit
A 2k paint desigened for applying to the rear bed of pick up trucks. |
 | TEROTEX Super 3000 Light 1L
Stone chip protection on sill panels, lower doors, aprons, spoilers. Also to re-create textured surfaces after repairing plastic parts eg bumpers with the Teroson plastic repair system.Super 3000 can be overpainted “wet-on-wet” after 15 minutes!The light colour product can be mixed with original paint colour to create a stonechip layer which will reduce visibility of minor paint damage.
|
 | Cetol HLS Teak 085 1L
Transparent, satin, antifungicidal woodcare product for interior and exterior use. Its woodstain like qualities ensure timber grain remains highly visible. Cetol HLS contains mould/algae inhibitors and is microporous allowing the timber to breathe. Available in a range of transparent colours.
Use: Suitable for most types of timber. Used as a primer/basecoat for Cetol Filter 7, Cetol TGL products and as a stand alone 3 coat system on garden furniture, BBQ tables, handrails etc. Also commonly used as an interior timber stain under Cetol TS Interior or as a timber flooring stain under Synteko Urethane |
 | Cetol Deck Natural 5l
A highly transparent durable finish designed to overcoat Sikkens HLS to improve wearability and UV resistance on decks. |
 | CRC Rust Converter 946ml
CRC Rust Converter neutralises rust and converts it to a tough, black primer in one easy step.
|
 | POR 15 US Standard Fuel Tank Sealer 950ml
Now sold on every continent, US Standard Fuel Tank Sealer is the toughest, non porous coating, flexible coating made.
Forget zinc chromate and rust inhibitors. The only way to stop rust is to keep moisture away from the metal.
Only a non porous coating can keep moisture away from metal. And we make the only one that's been tested and proven to work with all fuels. It has superior strength and fuel resistance and is non flammable.
Though for any tank sealer to work properly the tank must be free of contaminants, hence we usually sell this product as part of our money saving kits.
|
 | POR 15 Fuel Tank Repair Kit
Everything you need to repair a leaky fuel tank. |
 | POR 15 Rust Preventative Black 1L
POR 15® Rust Preventive Paint stops rust and corrosion permanently. It is unlike any other paint coating you have used before. It's surface tolerant characteristics means it loves corroded and porous surfaces like rust, corroded aluminium, sandblasted surfaces, fibreglass and even concrete. It will seal them with with a ceramic like, rock hard finish that won't crack, chip or peel. POR 15® Rust Preventive Paint's secret lies in it's curing process, unlike ordinary paints POR 15® Rust Preventive Paint cures by drawing moisture from within the metal and the atmosphere. Paint on by hand, cures through the process of solvent evaporation through pores(that's why you can smell a paint job for weeks). Those same pores allow microscopic amounts of air and moisture to gradually reach the surface of the painted metal.
|
 | U-POL Zinc 182 Anti Rust Barrier Coat 1L
ZINC 182 is a grey rust inhibiting primer for ferrous surfaces for the promotion of adhesion to metal surfaces.
|
 | HAMMERITE Hammered Silver 750ml
Durable, corrosion resistant decorative coating offering a decorative hammered appearance. |
 | LIC 30 Group 1 Mixed Colour 4l
A general purpose modified acrylic enamel formulated to give outstanding gloss and depth. LIC 30 will adhere to properly prepared metals without the need for a primer. |
 | Amercoat 476 Epoxy Beige (3:1) 3L
This rapid cure surfacing epoxy is self-priming and high building. It is the ideal primer underneath 2k polyurethane and 2k acrylic topcoats including PSX1015 and PSX 1025. 476 has excellent sanding and topcoat holdout properties is lead, phthalate and phenol free and exhibits excellent flow over large areas when using 476BS hardener. 476 is the ideal general purpose shop epoxy primer for sandblast applications. |
 | PPG 1030 Protecto Primer 9444 Grey 20L
A zinc phosphate, modified alkyd based, shop
primer. |
| 590B HARDENER 1L(4:1)
590 is a brushable urethane recommended for Marine and Industrial applications where a high quality, durable urethane is required and spraying isn't appropriate. |
 | PSX 1015A 20000 Full Gloss White 4l
A 2 pack acrylic-siloxaine coating, free of isocyanate. |
 | CRC Bright Zinc 1L
CRC Bright Zinc is a quick drying, zinc-rich coating for metal protection where a bright galvanised finish is required.
|
 | CRC Zinc it 1L
CRC Zinc It is a zinc-rich coating that offers similar advantges to hot dip galvanizing. It is recognized as the premium product of its type where galvanising requires repair, or bare metal requires protection.
|
 | WATTYL Killrust Special Protection Epoxy Enamel White 1L
A rust inhibiting epoxy enamel finish. Wattyl Killrust Superior Protection Epoxy Enamel is a quality anti-corrosive epoxy enamel specifically designed for iron and steel surfaces. The silicone and epoxy reinforced formulation provides a tough, flexible coating that has excellent durability properties. Wattyl Killrust Superior Protection Epoxy Enamel is perfect for protecting and decorating most metal surfaces around the home. It helps control rust, and the wide range of colours will help you achieve the look you're after. It can be used indoors or outdoors and, with the correct primer/undercoat, you can even use it on timber, brick, fibre cement, concrete and other surfaces.
INTENDED USES
• Metal fences, gates, railings
• Metal roofs
• Structural steel work
• Aluminium, concrete or timber after suitable priming |
| PPG 1833 Etch Primer Beige 4L
A single pack, chromate-free, anti-corrosive etch primer. |
| PPG 1833 Etch Primer 9444 Grey 4L
A single pack, chromate-free, anti-corrosive etch primer. |
| PPG 238 Primacote 9444 Grey 4L
A fast drying, general purpose, modified alkyd based
primer, using zinc phosphate anti-corrosive pigment. |
| COTEC Dec Cote Body Coat 10L
|
 | SEAL-KRETE Driveway Protector 3.78L
A clear water-based sealer formulated to provide “invisible” protection to bare concrete. |
 | SEAL-KRETE Original Waterproofing Sealer 3.78L
A water based, clear, acrylic coating designed to protect vertical concrete and masonry surfaces against moisture penetration.
|
 | XIM Latex Extender 946ml
Additive for Water Based Paints and Coatings,
• Improves Flow and Leveling of water based coatings
• Improves open time and brushing time by 10-15 min.
• Eliminates the ropy brush marks
• Leaves no residues
• Does not cloud clear water based varnishes
• Add just 2-6 ounces per gallon
• Does not cause yellowing
|
| XIM TILE DOC 31oz TUB KIT
|
 | XIM UMA Brand® Water Born Primer Bonder White 3.78L
Urethane Modified Acrylic - Properties of both a primer and adhesive
• Makes paint stick to tough-to-paint surfaces, including ceramic tile,
• Quick drying
• Tintable to pastel colors with universal tint colors
• Interior / Exterior – Low Temp. & High Humidity applications
• Top coat with all paints in several hours
|
| COTEC Dec Cote System
DESCRIPTION:
A liquid applied, fibre glass reinforced 100% Acrylic Membrane for decks and roofs.
TYPICAL USES:
Used on walk out decks, near flat roofs, patios. Is suitable for use in areas of foot traffic and complex detailing, where a weather tight finish is needed. PERRFORMANCE:
Can give trouble free life of 10 years or more on sound substrate e.g. concrete.
LIMITATIONS:
It is recommended that new concrete surfaces age before painting, to minimize lime “leaching” to the surface. Weathering will reduce gloss level over time. Do not apply if the surface or air temperature during application or drying is likely to fall below 10ºC.
Seek advise from CTL for detail work.
DATA:
Resin- 100% Acrylic,
wet adhesion modified
Solvent/Thinning - Water
Finish - Low Sheen 12-18 % @ 60º Colour - White/limited
colours
Dry time - Touch dry 30-60
min @ 20ºC
Recoat - 4-6 hours @ 20ºC
Primer - Refer over page
Durability - Excellent Expected Life on sound substrate > 10yrs
Pack size - 1,4,10 Litre
SPREAD RATE:
Theoretical coverage:
1.5 litres / m², depending on surface profile, full system. See over for component spreading rates.
|
| COTEC EVO Spraying Dead Flat White 10l
An Acrylic copolymer based dead flat. Specially formulated for spray application to eliminate banding and give an excellent even finish.
TYPICAL USES:
Interior ceilings, where a top quality finish is required.
Not suitable for table or bench tops.
PERFORMANCE:
Very good adhesion. Excellent spray properties drying to a very even flat finish. High performance spray application.
Can be touched up with roller even if previously sprayed.
LIMITATIONS:
Do not apply if the air and surface temperature during application and drying is likely to fall below 10ºC.
Not for use on horizontal surfaces such as table and bench tops
|
| COTEC EVO Easysand Acrylic Undercoat 10L
DESCRIPTION:
A specialised Acrylic water based high build sealer/undercoat.
TYPICAL USES:
Internal As a sealer/undercoat for Plaster board, wood and composite board such as MDF and Tri Board. The level of finish that can be achieved is dependant on the film build and the skill of the applicator. A level 5 finish is achievable.
External Can be used in some applications where a high fill product is required. Refer CTL Technical Dept.
PERFORMANCE:
Excellent adhesion to substrate.
High filling properties and low sink back.
Very good hold out for subsequent top coats.
Excellent leveling and Easy sanding.
LIMITATIONS:
Do not apply if the temperature during application and drying is likely to fall below 10ºC. Do not apply in very damp humid conditions.
Thin coats will not give the desired build and subsequently the finish will be substandard.
|
 | Bulls Eye High Hide Odorless Interior Primer Sealer 3.78L
Developed specifically for "people-sensitive" areas in commercial and residential environments this sprayable formula has even less odour than most water-based primers. Ideal for blocking stains from water, smoke, nicotine, graffiti, tannin and more. Its brilliant white non-yellowing formula is dry in 30 minutes and can be recoated in two hours or left for a dead flat finish. |
 | Metacare CF625 Light Grey 4L
A single pack high build finish based on chlorinated rubber resin. It is fast drying with good flexibilty and chemical resistance properties. This is the ideal finish for workshop floors where a low cost finish is desired. It offers a satin finish with an application rate of approximately 6 sqm per litre per coat. Thinning and clean up is with 6.01 thinners. |
 | FLOOD Penetrol Wood Oil 4L
Multi-purpose penetrol wood oil enhances the natural beauty of fine wood. |
 | FLOOD Penetrol 1L
Multi-purpose paint conditioner, wood prep, rust and metal treatment. |
 | FLOOD Floetrol Acrylic Paint Conditioner 1L
This acrylic paint conditioner enhances the performance of acrylics and other water based paints, stains and coatings so they flow like oil based paints - but without the clean up hassles. A transparent white in colour, it will not affect the colour of the paint.
Product features
• Extends the “wet edge” of your paint
• Provides a spray-like finish with roller or brush
• Extends spray-gun life
• Eliminates roller marks and common streaking and
shadowing problems
|
 | BONDALL PondTite Blue Lagoon 1L
A waterproofing membrane designed for waterproofing fish ponds, fountains and water features. |
 | EASY SEAL CHARCOAL 5L
Five Star EASY SEAL SOLUTION 1 is a ready to use, cost effective, low solids satin finish solvent sealer. It is formulated to revitalise, re-colour and seal new and old concrete (plain or stamped), exposed aggregate, driveways, paths, floors, cobblestone pavers, slate, concrete, bricks and various other surfaces.
|
 | DSS BCG4 Crystal Clear 2K - Anti Stone Chip (Quart Kit)
A clear two component urethane clear product to protect surfaces from stone chip and UV damage. |
 | DSS BSSBLT Tintable Shake & Shoot Pack (2.96L kit)
Tintable and sprayable easy to use Bed Liner |
 | DSS BHBL Hippo Liner Bedliner Kit (1.7L kit)
Durable black bedliner kit. |
industrial